POWER
AC POWER (Wall Outlet)
1.
Plug the supplied AC Power Adapter into the
Power Adapter Input (16)
on the rear
of the unit.
2.
Insert the wall plug of the AC Power Cord into an electrical wall outlet.
3.
Turn the
Power Switch (18)
to the ON position.
BATTERY POWER
This speaker has a built-in rechargeable battery. To charge the battery simply plug the
supplied AC Power Adapter into the
Power Adapter Input (16)
and turn the
Power Switch
(18)
to the OFF position.
The
Charging Indicator Light (15)
will turn RED when the battery is charging.
The
Charging Indicator Light (15)
will turn GREEN when the battery is 100% charged.
VOLUME
The volume is adjusted by turning the
VOLUME Control Knob (14)
on the rear of the unit.
•
To Increase the Volume: Rotate the
VOLUME Control Knob (14)
clockwise.
•
To Decrease the Volume: Rotate the
VOLUME Control Knob (14)
counterclockwise.
SELECTING A SOURCE
To select the source (Bluetooth, Line-In, USB, microSD, FM) you want to listen to simply
press the
MODE
button
(1)
. The LCD display will briefly display the current mode each time
the
MODE
button
(1)
is pressed.
NOTE
: the USB & microSD modes will only be available if there is a USB Flash Drive and/or
microSD card inserted in the speaker.
VOICE COMMANDS
This speaker includes voice commands to help announce each button press. To turn Voice
Commands ON or OFF press and hold the
MODE
button
(1)
.
To change the language of the Voice Commands press and hold the
PLAY/PAUSE
button
(5)
.
PAIRING TO A BLUETOOTH DEVICE
1.
Turn your Bluetooth device OFF entirely and then turn it back ON to refresh the
device’s Bluetooth memory.
2.
Find the Bluetooth menu on your device and make sure the Bluetooth function is
turned ON (refer to your device’s user manual for instructions on finding the Bluetooth
menu).
3.
Press the
MODE
button
(1)
repeatedly until the speaker is in Bluetooth Mode.
4.
On your device, perform a Bluetooth “device discovery” to add the speaker as a new
device.
5.
When the speaker is discovered your device will display “
DJSP1216LBT
in the
Bluetooth menu.
6.
If your device asks for a password, enter “0000” and the device will now pair with the
speaker and be ready to use.
7.
If supported by your device’s menu, set the DJSP1216LBT as a “trusted/authorized
device”
Once your Bluetooth device is successfully paired with the speaker you can begin listening to
music from your device by simply pressing Play on your device.
