TROUBLESHOOTING
NO SOUND
•
Make sure the AC adapter is fully inserted into the electrical outlet and the
DC
Input
on the Transmitter
(5)
.
•
Make sure the Speaker is ON by checking the
Power/Signal LED Indicator
(11)
. If the
Power/Signal LED Indicator (11)
is not lit up, either connect the
AC adapters, or replace the batteries in the speaker(s).
•
Make sure the connected device (MP3 Player, TV, DVD Player, etc.) is ON
and has adequate power.
•
Make sure the connected device (MP3 Player, TV, DVD Player, etc.) is
Playing and not on Pause.
•
Make sure the volume of speaker is not too low, or on mute.
•
Make sure the volume of the connected device (MP3 Player, TV, DVD Player,
etc.) is not too low, or on mute.
•
Unplug the connected device (MP3 Player, TV, DVD Player, etc.) from the
rear of the Transmitter for 5-10 seconds. Then re-connect the device to the
Transmitter, press Play (if necessary) on your device, and press the
TUNE
button on the front of the Speakers
(9)
or on the Remote
(17)
.
DISTORTED SOUND
•
Press the
TUNE
button on the front of the Speakers
(9)
or on the Remote
(17)
to make sure the Transmitter is properly connected to the Speaker(s).
•
Choose a different channel using the
Channel Selector Switch (4)
on the
rear of the Transmitter. NOTE: You must always press the
TUNE
button on
the Speakers
(9)
or Remote
(17)
after selecting a different channel.
•
Make sure the volume level of speakers and of the connected device (MP3
Player, TV, DVD Player, etc.) are not set too high.
•
The speaker(s) may be too far away from transmitter. Try moving the
speaker(s) closer. We recommend an operating distance of 1-150 feet in
open areas. When using the speakers in areas with walls, ceilings, and other
obstructions the speakers may need to be moved closer to the transmitter for
the best reception.
REMOTE NOT WORKING
•
Make sure there is nothing blocking the
Remote Sensor (6)
on the front of
the speaker(s).
•
Try moving closer to the speaker(s).
•
Make sure there are no objects in the signal path of the remote control beam
to the speaker(s).
•
Replace the batteries in the remote.
