TURNING THE DEVICE ON or OFF
SPEAKERS
To turn the Speakers ON/OFF press the
POWER
button
(10)
on the front of each
Speaker or press the
ON/OFF
button
(15)
on the remote. When the Speakers
are ON, the
Power/Signal LED Indicator (11)
will glow Blue.
TRANSMITTER
The Transmitter will automatically turn ON when connected to an electrical outlet.
NOTE: If there is no signal from a connected device (MP3 player, DVD player,
etc.) for a period of four minutes, the Transmitter will automatically enter a power-
saving standby mode. If you want to turn the Transmitter OFF completely, unplug
the Transmitter’s power adapter from your electrical outlet.
SPEAKER USE OPTIONS
INTRODUCTION:
These speakers can be used as a matched Stereo Pair in one
location, or as Individual Mono speakers in more than one location.
The Stereo Pair setup is perfect for smaller rooms which will allow for the full
stereo effect to be experienced.
The Individual (or Mono) setup will combine the Left & Right stereo channels into
one speaker so the full sound will now be heard from each speaker. This will
allow you to place each speaker in two separate locations in either a larger room
or in two completely separate rooms and still hear the full audio sound from each
speaker.
USING THE SPEAKERS AS A STEREO PAIR
1. Turn ON the audio source (MP3 player, TV, etc.) connected to the
Transmitter and the Transmitter
Signal LED (2)
will light up.
2. Select a channel by moving the
Channel Selector Switch (4)
on the Rear of
the Transmitter.
3. Set the
Left/Mono/Right Selector Switch (13)
on the bottom of each
speaker.
•
Set the switch on the Speaker you will position on the Left side of the
room to “
L
” (Left).
•
Then set the switch on the Speaker positioned on the Right side of the
room to “
R
” (Right).
4. Press the
POWER
button (
10)
on each Speaker to turn the speaker ON.
