4. On your device, perform a Bluetooth “device discovery” to add the
BS400HPBT/BS401HPBT as a new device.
5. When
the
headphones
are
discovered
your
device
will
display
“
BS400HPBT/BS401HPBT
” in the Bluetooth menu.
6. After selecting “
BS400HPBT/BS401HPBT
” from the Bluetooth menu the LED
indicator will slowly flash Blue, and the voice prompt will announce that Bluetooth
Pairing was successful.
7. If supported by your device’s menu, set the BS400HPBT/BS401HPBT as “set as
authorized” or “add to trusted devices”
PLAYING MUSIC
After successfully pairing the headphones with your Bluetooth device, you can begin playing
music simply by choosing the song you wish to hear on your device’s menu system (refer to
your device’s user manual for instructions on playing music).
PLAYBACK & VOLUME CONTROLS
All playback controls (Play, Pause, Next/Previous song, etc.) can be controlled either directly
on your device, or on the buttons on the headphones.
NOTE: the buttons on the headphones will only operate when connected to your device
via Bluetooth mode. The buttons will not function when the headphones are connected
with the 3.5mm headphone cable
•
PLAY
– press the PLAY / PAUSE button once to being playing music.
•
PAUSE
– press the PLAY / PAUSE button again to pause playback. Press PLAY /
PAUSE again to resume.
•
GO TO THE NEXT SONG/TRACK
– press the NEXT SONG / VOLUME UP button
•
GO TO THE PREVIOUS SONG/TRACK
– press the PREVIOUS SONG / VOLUME
DOWN button
•
VOLUME UP
– press and hold the NEXT SONG / VOLUME UP button
•
VOLUME DOWN
– press and hold the PREVIOUS SONG / VOLUME DOWN button
o
NOTE
: You can also adjust the using the volume controls on your connected
device.
ANSWERING & ENDING PHONE CALLS
When connected to a Bluetooth enabled smartphone the BS400HPBT/BS401HPBT can be
used as a mobile headset.
To Answer an incoming call
– Press the PLAY / PAUSE button
To End a call
– Press the PLAY / PAUSE button again
