ENGLISH
ENGLISH
SELF-CLEAN FUNCTION
Use the self clean function twice a week. If the water in your area
is very hard, the self-clean function should be used more frequently.
Make sure the iron is unplugged.
Set the steam knob to position “Self-clean”
Fill the water tank to the maximum level.
Put the plug in the wall socket.
Select the maximum ironing temperature.
Unplug the iron when the temperature has reached.
Hold the iron over the sink set the steam knob to position
“Self-clean” and gently shake the iron to and fro.
Release the steam knob after 5-10 seconds.
Repeat the self-clean process if the iron still contains a lot of im-
purities.
NOTE:
Steam and boiling water will come out of the soleplate impurities
and flakes will be flushed out.
Do not push and hold the steam knob to the position “Self-clean”
while ironing.
Before cleaning, unplug the iron from wall socket, allow the
appliance completely cool down, and then clean with a damp cloth,
do not immerse the unit into water or other liquids.
Regularly rinse the water tank with water, empty the water tank
after clean.
If ironing clothes with high temperature, will cause burns to your
clothes and residue left on the soleplate of the unit, it is proposed to
iron an old cloth to remove these residues from the soleplate.
If you use spray starch, wipe the soleplate occasionally with a soft
damp cloth to prevent the build-up of deposits.
After using, disconnect the unit from main socket, empty
remaining water from water tank and then store the iron after it has
CARE AND CLEAN
This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To re-
turn your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safety recycling.
CORRECT DISPOSAL
been completely cooled down.
Never use scouring pads, abrasive or chemical cleaners, or solvents
to clean the exterior or soleplate of your iron. Doing so will scratch
and/or damage the surface.
27
26
Содержание SIB-3879
Страница 15: ......