Bluestone SIB-3836, Руководство пользователя

Страница: 12 / 15

ENGLISH ENGLISH
Press spray button:
Ensure that there is enough water in the water reservoir.
SPRAYING
After the amber temperature pilot light first has gone out and has
come on again, you may start ironing. The amber pilot light will come
on from time to time during ironing.
Iron with low temperature if you do not know what kinds of fabrics.
WARNING:
If you set the temperature, control a lower setting after ironing at a
high temperature. Do not begin again before the amber pilot light
has come on and gone out again.
STEAMING – IRONING
Note before using:
As indicated on the temperature control, steam –ironing is only
possible at higher ironing temperatures.
“ ” : Do not use steam function.
“ ” : For moderate steam. At this level do not use turbo steam
function more than consecutive 2 times.
“ ” : For maximum steam.
Ensure that there is enough water in the water reservoir.
Steps for using steam – ironing:
Ensure that there is enough water in the water tank.
Set the temperature adjust button at the required position within
the steam area (“ ” to “MAX”)
Insert the main plug into the wall socket.
After the amber temperature pilot light first has gone, you may
start ironing.
Push the steam control knob to the required position.
NOTE:
For delicate fabrics, we recommend moistening the fabric beforehand
using the spray function, or putting a damp cloth between the iron
and the fabric. To avoid staining, do not use the spray on silk or
synthetic fabrics.
This feature provides extra steam to remove stubborn creases. The
extra steam works as long as the turbo knob are kept pressed-in.
Ensure that there is enough water in the water tank
Way to use:
Press and hold the shot-steam button to generate a powerful burst
of steam that can penetrate the fabrics and smooth the most difficult
and tough creases.
Only use when the steam iron has reached the steam or maximum
temperature.
NOTE:
Do not keep the button pressed-in for more than 10 seconds
without interruption or press it more than 3 times at once. For optimal
steam output, leave an interval of at least four seconds between
pressing the burst steam button.
Allow at least one-minute interval before applying Turbo Steam again.
If the amber temperature pilot light comes on, this indicates that
the iron is heating up again. Wait for the amber pilot light to go out.
Then you could recommence ironing.
By using this function, you could also iron vertically.
Never direct the steam towards people. Burns or serious injury
may occur.
STRONG STEAM
23 22