Bluestone SIB-3836, Руководство пользователя

Страница: 11 / 15

ENGLISH ENGLISH
13
14
15
16
17
18
The filling aperture must not be opened during use.
The iron must be used and rested on a stable surface.
When placing the iron on its stand, ensure that the surface on which
the stand is a placed is stable.
The iron is not to be used if it has been dropped, if there are visible
signs of damage or if it is leaking.
Do not repair the unit by yourself if you are unclear about this appliance
because of high voltage inside.
The appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety.
FOR STEAM IRONING:
When using steam ironing, you are recommending to using distilled water.
Burns can occur from touching hot metal parts, hot water, or steam.
Use caution when you turn a steam iron upside down – there may
be hot water in the reservoir.
Use steam when temperature knob is at least at “ ”
Do not use chemical additive, scented substances or decalcifi-
ers. Failure to comply with the above-mentioned regulations
leads to the loss of guarantee.
NOTE:
When using the iron for the first time, you may notice a slight emission
of smoke and hear some sounds made by expanding plastics. This
is quite normal and it stops after a short time. We also recommend
passing the iron over an ordinary cloth before using it for the first time.
FILLING WITH WATER (FOR STEAM- IRONING AND SPRAYING)
SETTING THE TEMPERATURE
Please fill this iron with normal tap water before using for the
first time.
For refilling, you can also use tap water.
However, if the water is very hard it is advisable to use distilled water.
Do not fill the water tank beyond the MAX indication.
The steps for filling water:
Remove the main plug from the wall socket before filling the iron.
Set the steam control to position (=no steam) and leave O when
temperature at least at “ ”
Open the filling funnel.
Pour water into the filling aperture.
Use the measuring beaker with spout for this purpose.
Close the filling funnel.
Set iron temperature.
Stand the iron on its end.
Insert the main plug into the wall socket.
Set the temperature control to the correct ironing temperature.
PREPARING FOR USE
GARMENT LABEL FABRIC TYPE
THERMOSTAT
REGULATION
Nylon Low temperature
Silk - wool Medium temperature
Cotton - linen High temperature
21 20