Bluestone GSB-3911, Руководство пользователя

Страница: 11 / 15

ENGLISH ENGLISH
Plug in, turn on the switch button when power-on, steam spray out after 40
seconds.
Power off when you turn the switch button to position “OFF”.
Install the foldable clothes hanger and the steam nozzle holder.
Insert the steam tube into the body with the steam tube screw and rotate
it to be fixed. Then, put the steam nozzle in the steam nozzle holder.
Install the brush on splint. Then, put the steam nozzle on the steam nozzle holder.
Unscrew the knob of water tank to fill in the clean water, and then screw
down the knob. Install the water tank on the body.
2
3
4
5
6
7
FOR GARMENT STEAMER:
NOTE:
When moving the appliance, hold the appliance body for movement. Never drag
the appliance by pulling the power cord.
When using garment steamer it is recommended to use distilled water.
Do not touch on the hot nozzle, hot water or steam.
Do not use chemical additive, scanted substances or decalcify. Failure to comply
with the above-mentioned regulations leads to the loss of guarantee.
When using the appliance for the first time, you may notice a slight emission
of smoke and hear some sounds made by expanding plastics. This is quite
normal and it stops after a short time. We also recommend passing the ap-
pliance over an ordinary cloth before using it for the first time.
PREPARING FOR USE
Insert the telescopic rods into the body with the buckle and rotate it to be
fixed. Open the buckle to pull the telescopic rods and adjust it to the suitable
position, then close the buckle to be fixed.
1
21 20