Bluestone Appliance BCIS45, Руководство пользователя

Страница: 9 / 44

8
Operation
•
Open the lid, and clean the inside hopper with dry cloth. Then carefully press on the flat surface of
the blade to make sure it is well fixed.
fixed.
NOTE : It is extremely important that :
•
WHEN CHECKING THE BLADE BE SURE THE UNIT IS LOW ENOUGH SO YOU MAY
SEE INSIDE THE HOPPER. DO NOT REACH IN WITHOUT FULL VISIBILITY OF THE
LOCATION OF THE BLADE.
•
DO NOT TOUCH THE END OF THE BLADE. IT IS SHARP AND MAY RESULT IN
SERIOUS INJURY.
•
Before plug the power cord in please examine the cord, plug if there is any damage or hidden danger
of leakage, or the contact is good. The unit has power on demand and is always off.
•
Open the lid and put in defined amount of ice cubes, then cover it. Kindly take note that the max-
imum of ice cubes in the hopper should be at least 5cm deep from the top surface of the machine.
•
Close the lid and Switch it on by the power switch on the side of the machine. For your safety,
shaving will not start with lid open.
•
You can adjust the size of ice flake from big to small by turning the adjusting knob.
•
For its full utilization and optimum efficiency, it is suggested that the diameter of the ice cubes
should be around 1". Big ice should be hammered into small pieces to make sure the size is suitable.
IMPORTANT: DO NOT HAMMER ICE INSIDE OF THE HOPPER OR YOU MAY
DAMAGE THE EQUIPMENT.
•
If ice is stuck together in the hopper and will not separate with a gentle tap, carefully remove the ice
in order to break it apart for standard operation.