BlueStar Heritage Classic RNB364GHCV2 Series Скачать руководство пользователя страница 46

LIMITED WARRANTY 

BlueStar® Cooking Appliances, BlueStar® Ventilation Hoods and Prizer Hoods® Ventilation Hoods

 

 

 

                           For further information about this warranty,  

 

                             contact Prizer-Painter Customer Service at [1-800-449-8691] 

 

Who Is Providing The Warranty? 

This Warranty is provided to you by Prizer-Painter Stove Works, Inc. 
(“Prizer-Painter”), which warrants the parts of your BlueStar® 
cooking appliance, BlueStar® ventilation hood or Prizer Hoods® 
ventilation hood (“Product”), as described below.   
 

Who Does This Warranty Cover

This Warranty covers the owner of the residence in which the 
Product is installed, and his or her spouse (“Owner”). 
 

To What Types Of Installations Does This Warranty Apply? 

This Warranty applies to cooking appliances and ventilation hoods 
installed in residential properties only. The Product must be 
installed by a certified gas technician or licensed plumber for the 
warranty to apply.  Self-installations or installations by a person, 
who is not a certified gas technician or a licensed plumber, will void 
this Warranty.  This Warranty is also void if the original factory 
installed serial number is altered or removed from the Product. 

 

What Products Does this Warranty Cover? 

This Warranty applies only to BlueStar® cooking appliances, 
BlueStar® ventilation hoods, and Prizer Hoods® ventilation hoods 
purchased in the continental U.S. and Canada on or after February 
22, 2002.   
 

What Products Does this Warranty Not

 

Cover? 

This Warranty does not apply to Products installed or used in any 
commercial or other non-residential property such as, but not 
limited to, day care facilities, hotels, motels, and nursing homes.  
This Warranty does not cover Products installed outside the U.S. or 
Canada. This Warranty does not apply to gas type conversions on 
cooking appliances not completed by a certified gas technician, 
licensed plumber or certified BlueStar® servicer. 

 

What Problems Does this Warranty Cover? 

Subject to the conditions set forth below, this Warranty covers 
defects in materials and workmanship that appear under normal 
use and maintenance. 

 

What Problems Does this Warranty Not Cover? 

This Warranty does not cover, and specifically excludes: 

 

Damage caused by shipping. 

 

Damage or repairs to the porcelain igniters, calibrations and 
normal adjustments after installation and setup, including burner 
adjustments. 

 

Normal wear, care, and maintenance of the Product as described 
in the installation and operating manual, such as cleaning of parts, 
discoloration of the griddle, rust, gasket materials, ceramic 
materials, and fuses.   

 

Damage or repairs caused by alterations or modifications, abuse, 
misuse, neglect, or improper installation, instruction, handling, 
operation, maintenance or storage. 

 

Accidental or intentional damage. 

 

Damage or repairs caused by unauthorized service or repairs 

 

Damage or repairs as a result of natural disasters, fires, floods, 
earthquakes, winds, lightning, corrosive atmosphere, loss of 
electrical power to the Product for any reason, or other 

conditions beyond Prizer-Painter’s control. 

 

Damage or repairs caused by alteration for outdoor use. 

 

Damage or repairs caused by the use of harsh chemicals or 
cleaning products improperly applied. 

 
This warranty is in lieu of all other express warranties.  

ALL IMPLIED 

WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE 
LIMITED TO THE DURATION OF THIS WARRANTY.

  Some states and 

provinces do not allow limitations on implied warranties, so the 
above limitation may not apply to you. 
 

If you are a California or Quebec resident, please refer to the 
section below. 
 

THE OWNER AND PRIZER-PAINTER AGREE THAT THE REMEDIES 
SET OUT HEREIN ARE THE OWNER’S EXCLUSIVE REMEDIES FOR 
BREACH OF ALL WARRANTIES, EXPRESS OR IMPLIED. 

 

WHETHER ANY CLAIM IS BASED ON NEGLIGENCE OR OTHER TORT, 
BREACH OF WARRANTY OR BREACH OF CONTRACT, OR ANY 
OTHER TORT THEORY, PRIZER-PAINTER SHALL IN NO EVENT BE 
LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, 
INCLUDING BUT NOT LIMITED TO EXTRA UTILITY EXPENSES, 
SHIPPING COSTS RELATED TO REPAIR OR REPLACEMENT OF ANY 
PRODUCT OR DAMAGES TO PROPERTY, RESULTING FROM BREACH 
OF THIS WARRANTY OR ANY IMPLIED WARRANTY.

  Some states 

and provinces do not allow the exclusion or limitation of incidental 
or consequential damages, so this provision may not apply to you. 

 
When Does Warranty Coverage Begin? 

Warranty coverage begins the date that the Product is originally 
installed. (“Installation Date”).   
 

How Long Does the Warranty Coverage Last? 

Registration is not required to obtain Warranty coverage, but 
registration affects the length and certain other remedies available 
under the Warranty.  If the Product is not registered, the Warranty 
lasts for one (1) year on all parts, including the functional component 
parts contained in the cast iron burner top; seven (7) days for 
cosmetic component defects as described below; and ninety (90) 
days on all floor models whether or not used for demonstration.    
 
If the Product is properly registered with Prizer-Painter within (30) 
days of the installation date, the Warranty lasts for ten (10) years 
on cast iron burner heads and grates; one (1) year on all other 
functional component parts and related service; seven (7) days for 
cosmetic flaws as described below; and provides for extended 
coverage on certain floor models under the conditions described 
below. 

 

Cosmetic Component Warranty:

  This Warranty covers all 

cosmetic component flaws for seven (7) calendar days from the 

date of delivery

 of the Product to the original purchaser.  Cosmetic 

components include top grates, ring grates, plate rail, kick panel, 
body sides, glass, control panel, door panel, back guards, oven seals,  

Содержание Heritage Classic RNB364GHCV2 Series

















































Отзывы: