BlueStar Heritage Classic RNB364GHCV2 Series Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 48

BlueStar Heritage Classic RNB364GHCV2 Series Скачать руководство пользователя страница 35

35

BEFORE CALLING FOR SERVICE

Check these helpful tips for any problems with your range. If you need additional help call BlueStar

®

Customer Service at

1-800-449-8691.

COOKTOP

PROBLEM

POSSIBLE CAUSE

SOLUTION

Burner will not ignite

– no

“clicking” sound

No electrical power to the unit.

Open Burner Models Only:
Igniter not connected to lead wire.

Igniter not connected to the correct lead wire

Lead wire is worn on chipped.

Lead wire is not connected to spark module.

Plug into a three-prong electrical outlet that is
properly grounded.

Check and re-set circuit breaker for the unit.

Open Burner Models Only:
Connect igniter to orange lead wire.

Connect igniter to the orange lead wire
attached to the burner.

Check for signs of wear or chips.

Burner will not ignite

–

“clicking” sound, but no spark

Gas not turned on

Open Burner Models Only:
Clogged burner ports

Venturi tube not aligned with the orifice

Lead wire is in the drip tray

Turn on gas supply.

Open Burner Models Only:
Use a push pin to clear ports.

Position venturi tube over orifice.

Attach lead wire to igniter.

Burner will not ignite

–

“clicking” sound with spark

Gas not turned on

Burner head OR cap not in correct location

Open Burner Models Only:
Air shutter needs adjustment.

Faulty igniter (dirty or cracked)

Turn on gas supply.

Identify burners and move them to the correct
location.

Open Burner Models Only:
See Top Burner Low Flame Adjustment
instructions.

Burner ignites

– “clicking”

sound does not stop

Burners are wet

Burner setting too low

Air draft flowing over cooktop

Open Burner Models Only:
Electrode wires not properly connected

Electric plug not in grounded outlet.

Let burners dry and try again.

Turn off, re-ignite and change setting.

Eliminate draft source.

Check outlet polarity.

Plug unit into a three-prong electrical outlet
that is properly grounded.

Open Burner Models Only:
Connect electrode wires.

Burner doesn’t fully ignite

Partial gas supply

Burner or burner cap not properly positioned

Clogged burner ports

Open Burner Models Only:
Burner head not in correct location

Low flame setting needs adjustment

Use a push pin to clear ports.

Make sure gas supply is fully on.

Check that burner or cap is in the proper
location.

Open Burner Models Only:
See Top Burner Air Shutter Adjustment
instructions.

Identify burners and move them to the correct
location.

Burner ignition delay

–

“clicking” sound then ignition
whoosh

Open Burner Models Only:
Air shutter needs adjustment

Sealed Burner Models Only:
Knob not in the correct position

Open Burner Models Only:
Turn burner to LOW setting to ignite.

See Top Burner Air Shutter Adjustment
instructions.

«
...
33
34
35
36
37
...
»

Содержание Heritage Classic RNB364GHCV2 Series

















































Отзывы:

Нет отзывов