04
1. Ensure that the stapler is in firm contact with the surface to be stapled and that
the stapler is correctly positioned.
2. Depress the trigger (2) firmly until the stapler gun fires (see fig 2).
How to Use the Stapler
1. The stapling force can be adjusted using the manual depth adjustment control knob (3).
2. Turn the knob clockwise to increase the stapling force.
3. Turn the knob anti-clockwise to decrease the stapling force.
Adjusting the Stapling Force
The staple gun comes complete with a staple remover for quickly and easily removing
driven staples.
How to Remove Staples
1. Hold the stapler in one hand and point away from your body.
2. Push in the plate (9) against the spring pressure disconnecting the end plate (8).
Push down slightly to remove the pressure rod and spring assembly (7) from the
feed bar.
3. There are two lugs on the front of the stapler which hold the carriage (5) in place
with two slots.
4. Securely hold the stapler and pull the carriage back against the spring pressure
using the grips (6) on the sides.
5. This will disconnect the two lugs from the two slots.
6. On the carriage (5) apply a downward pressure to release it from the staple gun.
Refer to the parts diagram image above to show how this should hang on the hinge
of the stapler.
7. Remove any loose staples/nails from the guidance track. Be careful doing this and
use pliers if necessary.
8. Reinsert the carriage and ensure the lugs are secured back into the two slots.
9. Reinsert the stapler feed bar and hook it upwards to retain it back into end plate
(8) within the stapler.
How to Clear Blockages
