03
1. Hold the stapler in one hand and point away from your body.
2. Push in the plate (9) against the spring pressure disconnecting the end plate (8).
Push down slightly to remove the pressure rod and spring assembly (7) from the
feed bar. This will withdraw it from the stapler.
3. Insert the new staples or nails into the guidance track. The image below shows the
correct way of inserting the different types of staples or nails into the stapler.
4. Reinsert the stapler feed bar and hook it upwards to retain it back into end plate
(8) within the stapler.
5. The stapler is now loaded correctly and can be used.
Loading the staple gun
fig.1
STAPLE EXIT PATH
fig.2
fig.3
