BlueSpot 07945, Руководство пользователя

Страница: 2 / 10

01
Thank you
for purchasing a BlueSpot product, you can find further information
on our range at
www.BlueSpot.uk.com
. Please ensure that you are using the
product correctly and that all guidance and cautions are followed in accordance
with the instructions. Please retain these instructions for future reference.
General Information
Safe use
Please make sure that you read these instructions carefully in order to avoid injury when
using the air gun. Follow all health and safety rules and regulations. If in doubt and available
please contact a more knowledgeable source.
DO NOT use if damaged.
• Maintain tool in good and clean condition for best and safest performance.
• Keep the work area clean, uncluttered and ensure there is adequate lighting.
• Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip
shoes.
• Keep children and unauthorised persons away from the work area.
• If the air gun is damaged do not use. If damage is found the air gun should be repaired
before use.
• ALWAYS
check you are able to handle the weight and power of the tool before use. If
you cannot handle the tool comfortably do not use the tool.
• ALWAYS
dress appropriately – clothing should be close fitted and long hair tied back.
Jewellery should be removed and shoes should be worn with a non-slip sole.
• ALWAYS
wear the correct eye or face protection when operating the air gun.
• ALWAYS
wear approved respiratory protection.
• ALWAYS
wear ear defenders to protect yourself from the loud noise caused from when
the impact gun is in use.
• ALWAYS
wear anti vibration gloves to protect yourself from the vibration caused by the
tool.
• ALWAYS
wear a safety helmet if you are using the tool overhead.
• ALWAYS
ensure you work in a well ventilated room.
• ALWAYS
ensure the hose does not cause a trip hazard when in use.
• ALWAYS
ensure the correct safety precautions are taken when using compressed air.
• ALWAYS
check and ensure all air connections are properly attached and sealed before use.
• ALWAYS
make sure the maintenance of the tool is carried out to prolong use and
performance.
• ALWAYS
make sure that the air pressure has been released before disconnecting.
• ALWAYS
make sure the machine has fully stopped before disconnecting.
• ALWAYS
ensure the tool has cooled down fully before storing as it can be very hot
after use.
• ALWAYS
disconnect the air gun fully from the air line before performing any
maintenance or storing.
• ALWAYS
make sure the machine is switched off when connecting it to the air supply.
• NEVER
operate the tool if you are under the influence of drugs or alcohol as this is
dangerous.
• NEVER
carry the tool by the air line.
• NEVER
use power tools in potentially explosive atmospheres unless they have been
designed for that purpose. The air gun has not been designed for that atmosphere.
• NEVER
make modifications to the tool.
• NEVER
direct air at yourself or anyone else.
• DO NOT
exceed the maximum air pressure stated on the tool.
• DO NOT
operate the air gun if you are tired as this could be dangerous.
• ALWAYS
stop using the tool straight away if you start to experience discomfort or pain.
Consult with a qualified health professional if needed.