ENG
LIS
H
4
WHAT’S IN THE BOX
Packed with your B170S you will find
•
Two detachable mains power cord
•
1 piece of 4-position terminal block (for SPEAKER OUT)
•
1 piece of 6-position terminal block (for LINE/MIC IN)
•
1 piece of 3-position terminal block (for Subwoofer OUT)
•
1 piece of 2-position terminal block (for IR IN)
•
Quick Setup Guide
QUICK START
Refer to the supplied B170S Quick Setup Guide for basic instructions
in setting up your new Bluesound Professional B170S. The following
important notes must also be observed when setting up your B170S.
IMPORTANT SETUP NOTES
•
Before setting up or making connections, ensure that the B170S and
other devices to be connected to B170S are unplugged or powered
down.
•
Bare wire or loose strands of wires must not touch the rear panel or
other adjacent terminals in the terminal block.
•
Ensure that terminal block’s R +/-, L +/-, +, -, GND are connected
accurately to corresponding terminals of the external devices they
are being hooked up.
•
Connect corresponding end of the AC power cord to B170S' AC
mains input and the AC power cord’s plug connected to mains power
outlet.
•
Tablets, smartphones and other applicable devices that support iOS
(Apple) or Android operating system can be used as mobile device
controller. These devices are not supplied with your B170S.
•
Download and install the corresponding “BluOS Controller” App for
your device.
•
The BluOS App is available as a Mobile App for Android, iOS, Kindle
and Desktop App for Windows and macOS Computers.
•
Mobile Apps are handled by the respective Application Stores of the
Mobile devices.
•
Desktop Apps are available to download directly from the Bluesound
homepage
SAVE THE PACKAGING
Please save the box and all of the packaging in which your B170S
arrived. Should you move or otherwise need to transport your B170S,
this is by far the safest container to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box
INTRODUCTION
GETTING STARTED