2. Set-up and Operation
1. Attach desired plates to the slots ensuring correct mating and locking of plate in its slot.
You may use any two different charging plate models at the same time.
2. Attach USB Type-C power adapter to the rear port.
3. Attach battery which matches with the installed charger battery plate.
4. (Optional) Touch the Turbo soft touch button to activate turbo charge mode. Turbo charge
will increase charge current and reduce charging time. Before using Turbo charge mode on
your battery, read the individual battery instructions in this manual.
5. Observe LED charge indicator to identify the battery pack charging status. A
blinking
amber
LED indicates that the battery pack is charging. When turbo mode is activated, the
LED will change to
blue and blink at a faster rate
. When the battery pack has finished
charging, the LED charge indicator will light as
solid green
. A
solid red
LED indicates that
the charger is in an error state.
6. Remove battery pack from the charger when not in use.
