T Y P - 7 5 M A G D R I L L
11
Ø
Insert the annular cutter into the
¾
” adapter.
Ø
Align the two “flat” sides of the annular cutter with the flat sides of the adapter.
o
CAUTION: Make certain the hex screw is seated into the flat side and not
simply on the round side of the cutter shank.
Ø
Tighten one of the hex screws while slowly rotating the cutter forward and
backwards.
o
Continue to tighten the screw until fully tightened.
Ø
Tighten the 2
nd
hex screw.
Ø
The annular cutter is ready to use.
1)
¾
” Adapter Hex Set Screws (2 total)
2) 1-1/4” Weldon Shank Set Screws (2 Total)
3) Annular Cutter (not included)
