S L - 1 . 2 5 S E A M L O C K E R
9
•
•
3) Switch machine on and place at the begging of the channel. The curved
guide rail on the machine ensures an easy placement of the machine at the
beginning of the channel.
•
4) The machine is drawn through the channel as the driving rollers feed the
machine over the material while locking the seam.
•
5) Lock seam on channel.
•
6) Move lever into open position.
•
7) Switch machine off and remove from material.
o
Beginning Flange:
§
In beginning flange operation you essentially have constraints at some points in the
channel.
•
1) Prepare the channel so that the machine can be brought into position. See
preparation detail below:
•
