S L - 1 . 2 5 S E A M L O C K E R
7
§
•
NOTE: No adjustments are used for sheet thickness. The machine will
automatically adjust itself depending on the sheet thickness as long as it’s
within machine’s specifications.
Ø
Machining Inner Radiuses:
o
If using the machine to lock seals in an inner radius capacity, the supporting rollers must be
removed prior to use. This is part 1 in the figure below. If using it for outer radiuses, the support
rollers can stay in place.
§
RUNNING THE MACHINE
Ø
Do all pre-operational and operational safety checks from Chapter 1.
Ø
Consider your security and stability as well as the orientation of the machine in the work area.
o
Consider the work surface material, condition, strength, density and rigidity. These factors
directly affect the tools operation and user safety.
o
Ensure the work surface is free of debris, oil, etc.
§
CAUTION: Always guide the electric cord away from the back of the machine and
ensure it does not pull across sharp surfaces!
o
NOTE: For better results, lightly oil the rollers on the machine prior to using.
Ø
Plug the machine into power source.
o
Start the machine by sliding switch 1 in picture below forward. Stop the machine by sliding the
switch backwards and release.
