4 ” Z 1 C O R E D R I L L
2
Ø
DO keep body parts, clothing & power cords clear of turning/cutting pieces. Stay alert and
use common since when using this tool.
Ø
DO allow machine to reach operating speed before starting a hole.
Ø
DO unplug machine while changing or adjusting cutting bits so as not to accidentally turn
machine on.
Ø
DO remove adjusting wrenches prior to turning the machine on.
Ø
DO guard against electric shock by only operating this tool on a properly functioning GFCI
(Ground Fault Circuit Interrupt) circuit.
Ø
DO be mindful that power tools can expose an operator to vibrations transmitted trough
contact with the machine. Prolonged exposure can lead to medical issues which should be
discussed with a medical professional.
Ø
DO tie in a drip loop in the power cord to prevent water from running into the power
receptacle.
Ø
DO use a dust extraction system for cutting materials that create dust. The operator should
also wear a protective respiratory device.
Ø
DO NOT make adjustments to machine while the machine is running.
Ø
DO NOT switch off the machine when it is under load, except in an emergency.
Ø
DO NOT remove or modify grounding plug. Only to be used on a properly grounded GFCI
circuit.
Ø
DO NOT leave the machine running when not in use.
Ø
DO NOT hold the work piece by hand or using body. Always mechanically clamp or secure
work piece.
Ø
DO NOT allow operator to make contact with grounded surfaces such as metal objects.
Ø
DO NOT allow liquids to enter the machine’s ventilation system.
Ø
DO NOT operate machine outside of machine specifications.
Ø
DO NOT touch moving parts while the machine is running as death or dismemberment could
occur.
Ø
DO NOT operate machine overhead (Inverted) when drilling “wet” type cores.
Ø
DO NOT remove machines electrical components while connected to a power source. Only to
be removed for service by qualified personal and put back on the machine after service is
complete.
Ø
DO NOT allow children or untrained personal to operate machine.
Ø
DO NOT use this machine in the rain or a wet environment.
Ø
DO NOT operate in the presence of explosive materials as power tools create sparks which
may ignite dust or fumes.
Ø
DO NOT drill into an area that may contain a live electrical wire/circuit.
