22
QUESTIONS?
Just call 800.762.1142 for parts and service. For faster service, have the DPCI number ready when when calling.
5. Spoon several drops of solution, or use a squirt bottle, at all “X” locations (Figures 5 and 6).
a. If any bubbles appear, turn LP gas tank valve to “CLOSED,” reconnect and re-test.
b. If you continue to see bubbles after several attempts, turn LP gas tank valve to “CLOSED”
and disconnect LP gas tank, per “Disconnecting LP Gas Tank” section. Contact
1.800.762.1142 for assistance.
c. If no bubbles appear after one minute, turn LP gas tank valve to “CLOSED,” wipe away
solution and proceed.
Lighting
W
Caution: Keep outdoor gas appliance area clear and free from combustible
materials, gasoline and other flammable vapors and liquids.
W
Caution: Do NOT obstruct the flow of combustion and ventilation air.
W
Caution: Check and clean burner/venturi tubes for insects and insect nests. A
clogged tube can lead to a fire.
W
Caution: Attempting to light the burner with a cover on it may cause an
explosion.
1. Make sure all labels, packaging and protective films have been removed from the outdoor
fireplace.
2. Check for obstructions of airflow to the burner. Spiders, insects and webs can clog the burner/
venturi tube. A clogged burner tube can lead to a fire.
3. Control knob must be in the “ OFF” position (Figure 7).
4. Clear small area of lava rocks away from the pilot housing (Figure 8).
5. Connect LP gas tank per “Installing LP Gas Tank” section.
6. Turn LP gas tank valve to “OPEN.”
7. Push and turn control knob to (HIGH). The burner should light. Repeat up to three times.
operating instructions
Figure 7
OFF / APAGADO
Figure 8