21
QUESTIONS?
Just call 800.762.1142 for parts and service. For faster service, have the DPCI number ready when when calling.
operating instructions
Checking for Leaks
W
WARNING: Before using this outdoor fireplace, make sure you have read,
understand and are following all information provided in the “Dangers and
Warnings” section on page 2. Failure to follow those instructions can cause
death, serious injury or property damage.
Burner Connections
1. Make sure the regulator hose and valve connections are securely fastened to the burner and
the tank.
2. Visually check the connection between the burner/venturi tube and orifice.
3. Make sure the burner/venturi tube fits over the orifice.
W
WARNING: Failure to inspect this connection or follow these instructions could
cause a fire or an explosion which can cause death, serious bodily injury or
damage to property.
4. Please refer to diagrams for proper installation (Figures 5 and 6).
5. If the burner/venturi tube does not rest flush to the orifice as shown, please contact
1.800.762.1142 for assistance.
Tank/Gas Line Connection
1. Make 2-3 oz. of leak detection solution by mixing one part liquid dishwashing soap with three
parts water.
2. Make sure control knob is in the “ OFF” position (Figure 7).
3. Connect LP gas tank per “Installing LP Gas Tank” section.
4. Turn LP gas tank valve to “OPEN.”
Figure 5
LP Gas
Connection
Burner/Venturi
Tube
Burner
Supply Tube
LP Gas Valve
with Orifice
Figure 6
X
X
X
X
X