BLUENOTE BELVEDERE VILLA, Руководство пользователя, Страница: 14 / 15

TURNTABLE (THE) DOES
NOT START WHEN THE
TURNTABLE IS
SWITCHED ON
•
The AC turntable plug is
disconnected from the AC wall plug
•
Connect it being sure that the
AC wall plug works
The Turntable just does
not start
•
Have you wrapped the Belt
around the Pulley and the Platter
properly
•
If not just do it
•
The electrical connection inside
the turntable could be damaged
•
Contact your dealer for
assistance
When the turntable is
switched on it does not
start automatically and the
motor makes a vibration
•
The Belt is too slack and does
not produce the necessary friction with
the pulley
•
When the turntable is
switched the belt wraps off
the platter edge
•
The level of the black curved
board of the turntable is wrong, higher or
downer than the standard position
•
Adjusting the height of the
black board through the spring supports
rotation helped by their bolt shaped
heads. Approximately the regular
position is found when spinning at 33
rpm the belt is cantered on the platter
edge. The approximate right position
of the spring supports are: (considering
the turntable front view) LEFT at the
same level of the tip of its threaded bar;
RIGHT 5mm higher than the tip of its
threaded bar; BACK 8mm higher than
the tip of its threaded bar
When the turntable is
switched on it does not
start automatically
•
The Platter Bearing/Spindle
system are very dirty making a too strong
friction
•
Troubleshooting 11
Belvedere
Italian Prestige Rigid Turntable
F.A.Q.
Adjustment
BELVEDERE Turntable
ACTION DESCRIPTION HOW TO ADJUST IT
DUST COVER FRICTION
ADJUSTMENT
•
The Dust Cover is hard or slack
during open/close adjustment
•
Adjust the single screw present on each hinge till
you reach your proper wanted friction
LEVELLING THE TURNTABLE
•
The Turntable is not levelled
•
With a spirit level take care of levelling the
platter on its vertical and horizontal lines.
Adjust the height of the black board through the spring
supports rotation helped by their bolt shaped heads.
Approximately the regular position is found when spinning