9
Instructions
Click on QR
Select the QR code
Select “Choose”
Click on the photo button
to go to the album on
your smartphone
Select “Reset” to
restore to default
settings. Click “OK” if
you want to return to
default settings.
You
will have to connect in
AP Mode again!
QR code light setting
preview interface. slide
left or right to check
light effcts for
different time periods.
Restore to default settings
Read QR code setting from phone album
Click on Menu and
select Reset.
Reset the ProLED
1. Switch the Proled “off” and “on”
2. Press and hold the reset
bue light for 10 sec.
3. The blue light will flash several times,
reset is done.
Trouble shooting
Problem
Possible cause
Solution
Light does not
work
Check if the light is connected to power supply
Connect to power supply
Check if the brightness level is set at 0%
Adjust the brighness level on your mobile devise
Check if the light is swiched off or if the light has been set
to a time setting
Turn it on or adjust the time setting
The light stays
on without a
light off time
Check if the total time period is over 24 hours
Adjust the time accordingly, or reset to factory settings
Check if the current time is not set accoding to your local
current time
GB
