bluelab CTRL50110, Инструкция по уходу и эксплуатации

Страница: 7 / 16

2.3 Connecting to external equipment
This product is designed to activate mains powered equipment such as pumps, heaters, and
coolers via inputs from a Bluelab ® control device.
WARNING
To avoid possible electric shock, personal injury or death, only use the factory supplied cables
to connect to external devices.
CAUTION
To avoid possible damage to the Bluelab® Powerpod™ ensure that the total maximum load of
the connected external equipment is not more that 8.5 Amps.
Connect external equipment into one or all
four of the power sockets on the Bluelab
®
Powerpod ™ .
Connect the dosing cable into the Input
connector on the underside of the Bluelab
®
Powerpod ™ . Push and screw the collar fully
into the connector. This cable will connect to
the Bluelab
®
Pro Controller or some Bluelab
®
Dosetronic’s
™3
.
Connect a Bluelab doser or another Bluelab
®
Powerpod
™
into the Output connector as
shown on the underside of the Bluelab
®
Powerpod ™ . Push and screw the collar fully
into the connector.
Examples of how to set up the Bluelab ® Powerpod ™ are illustrated below.
3
Bluelab
®
Powerpod
™
is compatible with most Bluelab
®
Dosetronic
™
’s manufactured after 2010, please check with Bluelab
®
Customer Support for more information.
1
2
3
A B
Connect mains
output power
cables here
Line up pins
Line up pins
Push & screw
Push & screw
Bluelab
®
Peridoser
Heater/
Cooler
Heater/
Cooler
pH Dosing
Unit
Nutrient A
Dosing Unit
Nutrient B
Dosing Unit
Bluelab
®
Pro Controller
™
or
Bluelab
®
Dosetronic
™
Bluelab
®
Pro Controller
™
or
Bluelab
®
Dosetronic
™
How to connect other dosing units: How to connect a Bluelab ® Peridoser ™ unit:
6