www.bluegrassliving.com
200560-01A
6
ASSEMBLY
3. Start building the top ring on
the opposite side of the fire bowl
from where the swing grill will be
mounted.
Look for the holes closer to the
middle of the fire bowl – this
is where the swing grill will be
secured. Make sure not to fully
tighten bolts until all four sections
of the top ring are assembled.
Attach one top ring section [C] to
the fire bowl [D] by inserting one M6
x 15 mm bolt [O] into the top ring's
support arm from the outside, then
through one of the holes in the top
edge of the fire bowl. On the inside
of the fire bowl, insert one bracket
[E] and secure in place with one
washer [P] and nut [Q].
Insert a second top ring section
into the end of the first top ring
section and attach to the fire bowl
as described above.
4. Before connecting the last two
top ring sections, attach the swing
grill stand [K] to the fire bowl [D].
Insert two M6 x 15 mm bolts [O]
into the stand from the outside
and through the two holes located
vertically on the fire bowl. Secure
each bolt on the inside of the fire
bowl with one washer [P] and nut
[Q]. Attach the remaining two top
ring sections [C] as described in
step 3.
Make sure all of the top ring
sections are joined together and
that all the brackets [E] are at a right
angle with the tab positioned close
to the top edge of the fire bowl and
facing towards the center of the fire
bowl. Securely tighten all bolts.
