Create Range Windows User Manual
23
Playback Settings
Bluefish444 sequence playback options are available when the sequence is active at: Sequence
Settings -
> Playback Settings…
Available Options:
YUV/RGB Matrix Range:
Select SMPTE or CGR matrix range for SDI output.
RT indicator:
When enabled, a green/red indicator box on the Program desktop display will
display whether the sequence is being play in real-time (GREEN) or not (RED).
(1080 23/24) p/psf mode:
Select psf mode for output progressive-scan video using
interlaced equipment such as SDI broadcast monitor. It will divide a progressive frame into
two
segments/fields.
BF Scaler on SDI Out:
Enables scaling on the SDI Output.
Only supported conversions will apply a change to the SDI Video Output.
3:2 Pulldown Patterns:
Choose between Standard Pull down Pattern and Advance
Pulldown Pattern.
Export to Tape
Bluefish444 hardware enables exporting from Bluefish444‟s sequence presets directly onto
tape. To export sequence to a tape:
1. Make sure the recording device is connected to your Bluefish444 hardware using SDI
cable and RS-422 connections.
2.
To be able to control the deck from CS5, make sure the deck is on „receiving commands‟
mode or „Remote‟.
3. Activate the sequence you want to export and position the Work Area Bar over the
section of the sequence you want to export or over all of the sequence.
4. In the main menu bar select FILE
→ EXPORT → Print To Tape.
Note: Rendering to 10-bit YUV v210 might start automatically for best results.
At this point the „Export to Tape‟ dialog box will open (see next page image)
