Unpacking & Checking Of Contents
Unpack your BD PRO-33 carefully and inspect if all parts are intact. If any of the parts are
missing or damaged, please call 844-240-0444 or email [email protected].
Operating Instructions
This BD PRO-33 requires NO ASSEMBLY. The BD PRO-33 is packaged and ready to be put to
work.
The BD PRO-33 is intended to be used for drying carpet spills, drying surfaces such as bath-
room, garage or room floors, ventilating and circulating air, as well as drying hard-to-reach
areas such as under a leaky sink or inside damp cabinets.
1. Place the unit on the surface that needs to be dried.
2. Plug the unit into a grounded outlet .
3. Select the desired speed and position (0º, 45º or 90º].
Maintenance
Cleaning
User Servicing Instructions
WARNING:
As with all electrical equipment, the unit must be disconnected
from power before servicing or cleaning.
WARNING:
To reduce the risk of injury from the air mover accidentally
starting, unplug power cord before cleaning. The outside of the unit may be
cleaned with a damp cloth to remove any dust or residue.
WARNING:
Be sure to disconnect power supply before attempting to service
or remove any components. Do not attempt to service your air mover beyond
what is described in the user manual. For all other servicing, follow instructions
in the Warranty section.
1. Before each use, inspect the unit for damage, blocked inlets and exhaust and for foreign
material buildup.
2. When the BD PRO-33 is turned on, inspect the unit for excessive vibration. In the event
of excessive vibration or if the fan wheel rubs against the rotomolded housing,
immediately turn off the unit and have a certified technician inspect the unit.
6
90º Angle
Ceiling and Ventilation
45º Angle
Walls
Horizontal
Floors and Carpet
BLUEDRIPRO.COM
