23
English
3.9 BlueChimney with remote control
Note: The transmitter has been paired to the control box from the factory so that BlueChimney can be
put into service at once.
If the pairing does not work, or if you want to pair 2 or more transmitters paired to the same BlueChimney, use
the following pairing instructions:
Pairing with transmitter
(up to 7 transmitters) to govern the same BlueChimney:
Press and release the pairing button. The green LED will now flash quickly (approx. twice a second for 15
seconds).
Press the manual transmitter start key once within 15 seconds, and it will be paired once the green LED stops
flashing after another 15 seconds.
Pairing of multiple transmitters:
The second manual transmitter can be paired within 15 seconds after the pairing of the first manual
transmitter. The third manual transmitter can be paired within 15 seconds after the pairing of the second
manual transmitter. The sequence is similar with any number of subsequent transmitters (up to 7
transmitters). When the green LED stops flashing quickly and reverts to flashing once a second, the pairing
function will be complete, and the transmitter(s) can be put into service.
Note:
The transmitter’s range is up to 50 metres. Walls, metal screens, plate glass, radio signals, etc., can
reduce or disrupt the transmitter’s range.
Specifications of Remote Control BC/RC
Model
BlueChimney BC/RC
Transmitter
433 Mhz
Battery
6 Volt
— 2 x CR 2016
Range
Up to 50 m.
Note: If BlueChimney is delivered with a remote control, the package will not include a cabled speed
controller.
Pairing button
Start
Insert the power supply
plug into a socket. Insert
the round power supply
plug in the control box into
the round socket positioned
to the left of the box.
Insert the motor cable plug (female)
into the large round connector, turn it
into the notch, press it and screw it
tight. Turn on the power socket; the
LED lamp between the square
sockets will now flash green and then
light red.
