6
Collecting data from guard tour readers
Both the BS-4010 Client and the BS-4010m Server are able to collect data from guard
tour readers wirelessly. Compatible readers include models BP-2002S, BP-2002F,
BP-2002-W, and BP-2002B-W.
¾
Turn on the BS-4010 / BS-4010 M.
¾
Set the reader into the indentation on the BS-4010. For reader model BP-2002S,
please place its reading head between the status lights, and set its top flush against
the inside edge of the BS-4010.
¾
If there is data that needs to be transferred from the reader to the BS-4010 /
BS-4010M, its blue LED light will start flashing rapidly, indicating that data is
being transferred. When the transfer process is complete, the BS-4010 / BS-4010
M will make one long beep, then one short beep periodically every few seconds,
indicating that the reader connected no longer has any data to upload, and should
be removed. If you have another reader that needs to have its data transferred,
please place it in the unit at this time.
¾
If the BS-4010 / BS-4010m makes three short beeps, it means that its memory is
full, and will need to have it uploaded before being able to collect any more data
from readers.
Remote data upload
¾
When the BS-4010 Client contains data that needs to be uploaded, if in 30
seconds it does not communicate with a reader or the PC, it will automatically
attempt to dial and connect to the BS-4010 M Server in order to upload its data.
¾
If for any reason, the BS-4010 Client fails to upload data upon the first try (for
example, if the BS-4010 M server has not been turned on, or if the dial-up phone
number stored in it is wrong, etc.), the BS-4010 will try again once every 30
seconds for three times. If it fails all three times, the BS-4010 will stop for five
minutes before attempting to dial again.
¾
Please go to the next step to upload data to the main software of PC.
Local data upload
¾
Both the BS-4010 Client and the BS-4010 M Server are capable of uploading
their stored data to the PC directly.
-
Connect the unit to the PC using the provided USB cable.
-
Start the patrol management software, and select the appropriate
communication method.
-
Open the “connect” screen in the patrol management software, which will
automatically collect data from the BS-4010 / BS-4010 M unit.
