3
Description of the BS-4010M/BS-4010 hardware
Status LED Lights
(in the descriptions below, “up” indicates the direction on the BS-4010 where the
status LED lights are located):
-
Red LED – Upper-Left
∼
Flashing: communicating over the mobile phone network.
∼
Constant on: the BS-4010 has data that needs to be uploaded.
∼
Constant off: the BS-4010 does not have data that needs to be uploaded.
-
Green LED – Lower-Left
∼
Flashing once per second: the BS-4010 is operating normally.
-
Red LED – Upper-Right
∼
Constant on: the unit is connected with the remote unit via its modem
module.
∼
Constant off: the unit is not connected with the remote unit via its
modem module.
-
Blue LED – Lower-Right
∼
Flashing once per second: the BS-4010 is operating normally.
∼
Flashing quickly: the BS-4010 is communicating with a guard tour
reader.
Audio Signals
There are two types of audio signals: long beep and short beep.
Some of the audio signals below have multiple meanings depending on the situation.
-
Short Beep (once)
∼
Guard tour reader has been found, but the reader does not contain data
that needs to be uploaded.
∼
The local unit has connected successfully with the remote unit via the
phone line.
-
Short Beep (twice consecutively)
∼
The phone line has not been connected properly.
∼
The remote phone number is busy or is not being answered.
∼
Guard tour reader has been found, and the reader contains data that needs
to be uploaded.
-
Short Beep (three times consecutively)
∼
The BS-4010’s memory is full, please upload to the BS-4010m first.
∼
Phone dialing has been disabled.
-
Long Beep (once)
∼
Data transfer from the reader to the BS-4010 has been completed.
-
Long Beep (three times consecutively)
∼
Data has been completely transferred via the phone line, and the line has
been disconnected.
-
Long Beep (once) + Short Beep (three times)
