After Reading a Card, 4 Beeps With 4 Flashes
The reading was not successful. The reader memory is full, the data needs to be uploaded before
more readings can be made.
After Reading a Card, 1 Beep With 4 Flashes, Followed By 4 Beeps With 4 Flashes
The reading was successful, but the reader’s internal clock should be calibrated with the PC before
further readings are made
After Reading a Signal Card, The LED Light Flashes Continuously
The battery is low and needs to be changed.
After Reading a Signal Card, 1 Beep with 4 Flashes Followed by 8 “Beep” Sounds With 8 Flashes
of the LED
There is an error within the reader. It needs to be connected with the computer, have its data
uploaded, then initialized.
BP-2012F
A display of the current time.
(If a card reading has just been made, is accompanied by 4 beeps with 4 flashes of the
LED.) The reader’s memory is full. It needs to upload its data before further readings can be
performed.
(If reader makes 4 beeps with 4 flashes of LED, when the reader just has been turned
on.) The reader’s internal clock needs to be calibrated with the PC before further readings can be
made
After Reading a Signal Card, The LED Light Flashes Continuously
The battery is low and the reader needs a new battery.
After Reading a Signal Card, 1 Beep with 4 Flashes Followed by 8 “Beep” Sounds With 8 Flashes
of the LED
There is an error within the reader. It needs to be connected with the computer, have its data
uploaded, then initialized.
4
