3 Installing and Connecting
This section provides details about FR900 I/O ports and status LEDs. It also explains how to install the Reader
and connect it to your network
3.1 FR900 LED Status
Boot Complete Status
When the FR900 has finished booting, the ACTV-STAT-ERR LED will turn on three times in green.
LLRP Server Status :
Status
ACTV
STAT
ERR
Normal (not RFID Tagging)
-
GREEN
-
Initialize fail
-
RED
RED Blink
Connection or disconnection with
client
-
GREEN Blink (2 times)
-
RFID Tagging
GREEN Blink
GREEN
-
Table 3.1 LLRP Server Status LED
Image Upgrade Status :
Status
ACTV
STAT
ERR
Image upgrade
GREEN
GREEN
-
Factory Reset
GREEN
RED
-
Table 3.2 Image upgade Status LED
3.2 Installing and Connecting the Reader
The primary installation and connection steps for FR900 are:
1.
Position the Reader appropriately for your environment.
2.
Connect the antenna (s) to the appropriate ports on the Reader.
3.
Connect power to the Reader.
4.
Connect the Reader to the network.
5.
Configure region setting on the Reader.
6.
Test the Reader installation by reading tags.
3.3 Detailed Installation Procedures
This section provides the details for each installation and connection step.
3.3.1 Step 1: Position the FR900 Reader and install the Reader
.
Choose a suitable location for your Reader. The device should be placed away from direct sunlight, high
humidity, extreme temperatures and sources of electromagnetic interference.
To power the reader using an external universal power supply, make sure the outlet is nearby.
6
