5
Basic Operations
IMPORTANT:
The headset needs to be ‘paired’ with your Bluetooth mobile phone fi rst, before you can
use the following functions (See
Pairing to your Bluetooth mobile
phone
page 3).
Make a Call (Normal Dial):
Dial a contact and press send on your phone. Audio will automatically be on the
V12.
Note: With some phones like Siemens S55 and Panasonic X70, audio will at fi rst be on
the phone during an outgoing call. You need to press the
MFB(3)
for 1 second to transfer
the audio to your headset.
Answer a Call:
During the ring tone, press the
MFB(3)
fi rmly to answer the call (1st beep or until
ACCEPT
is displayed).
During an incoming call, Caller ID will be displayed on the
LCD(4)
. If you turned on the
vibrate option, the headset will vibrate while ringing during an incoming call (See
Turning
the Vibrate Option On or Off
on page 6).
Note: With some phones paired to
V12
(Headset profi le phones only),
RI
n
GI
n
G
is
displayed instead of the caller ID.
End a Call:
Press the
MFB(3)
fi rmly to end the call (1st beep, or until
E
n
d CALL
is displayed).
Voice Dial:
Important:
Make sure the voice dialling function of your phone is activated.
Record at least one
voice tag
. (Kindly refer to the procedure in your phone’s manual.)
Note: Voice dialling entries must be stored in the phone’s memory, not on the SIM card!
1. Press the
MFB(3)
fi rmly (1st beep or until
VOICE dIAL
is displayed). A voice dial
tone will be heard on the headset, prompting the user to say the voice tag of a
contact to call.
2. Say the voice tag exactly as how you recorded it.
3. The voice will be played back to you, then the phone will dial the number
automatically.
Redial
(For Handsfree Profi le Phones only):
Press the
MFB(3)
for 3 seconds (2nd beep, or until
REdIAL
is displayed).
Reject a Call
(For Handsfree Profi le Phones only):
During the ring tone, press the
MFB(3)
for 3 seconds (2nd beep, or until
REJECT
is displayed).
