14
Disclaimers
This manual is published by BlueAnt. The information contained in this document is subject to change
without notice. All rights reserved. The Bluetooth word, mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by BlueAnt is under license. Microsoft, Windows, and Windows XP are registered
trademarks of Microsoft, Inc. Other trademarks and trade names are those of their respective owners.
Federal Communications Commission (FCC) statement
15.21
You are cautioned that changes or modifi cations not expressly approved by the part responsible for
compliance could void the users authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
8.
How can I stay near the V12 but not have calls diverted through it?
The V12 will remain connected within a range of 10 meters so if you are staying near
the device but want to take calls through the phone simply switch the V12 off by long
pressing the MFB button.
9.
My phone says “Bluetooth Module not found” what can I do?
This means that your phone cannot fi nd its internal Bluetooth chip for some reason. Restarting
your phone should fi x this problem. If not please contact your phones manufacturer.
10. I have a pda phone that pairs to the V12 but has trouble transferring calls, how
can I fi x this?
Go to the phone manufacturers’ website and download and install the latest ROM software for
your device. Many new pda phones are software upgradeable and fi xes are made available
for problems such as this. This is especially the case with newly released devices.
11. Why can’t I hear the dial tone from headset when I dial?
Check the Bluetooth protocol of your mobile phone to see if it supports in-band
ring tone. If it does, then you should hear the dial tone (such as Nokia series) or if it
doesn’t you cannot (such as some Sony-Ericsson series).
12. Voice dialing is not successful every time what can I do?
Using your headset to record the voice tags can enhance the recognition rate.
Please refer to the user guide of your phone. Noisy environments can affect voice
recognition. Record your voice commands in a quiet place.
13. I have read all the solutions in this document but I still cannot get my V12 to
work properly, what can I do?
Please make an enquiry to on our website or call the Blueant Customer Service Team
on
1 866 891-3032 (Nth America), 1300 669 049 (AUS) or 0800 443 122 (NZ)