Multipoint
Up to 2 phones can connect to the T2 at the same time. To pair a
second phone:
1. Use your phone’s Bluetooth menu to disconnect the existing paired
phone from the T2.
2. With the T2 switched on, hold down the
Command
button until the
T2 starts to talk you through the pairing process.
3. When the pairing is complete, use the Bluetooth menu on each
phone to reconnect them to the T2.
When you have 2 phones connected, you can always answer a call on
either phone. If you initiate a call through the T2, or activate phone
voice dialing, it will happen on the “primary phone”: the one that
connected to the T2 fi rst.
9
Listening to Audio
The T2 supports A2DP audio streaming: if your phone or Bluetooth
device supports the A2DP profi le then you can simply start playing
music or any other audio (including directions from a GPS application
on the phone) and it will automatically transfer to the headset.
The audio will mute automatically if you make or receive a phone call,
and resume when the call ends.
Note:
The T2 only supports A2DP bluetooth audio streaming from the
primary phone.
Reset your T2
If you are having problems with the T2, you can reset it and start
again:
1. Disconnect the T2 from your phone by deleting the pairing from
your phone’s Bluetooth menu.
2. Turn your phone off and back on again to clear its memory.
3. With the T2 switched on, but not connected to any phones, hold
down all three buttons (
Vol +
,
Vol -
, and the
Command
button) for
about 3 seconds.
The T2 will reset and go straight to pairing mode. You will now need
to pair your phone with the T2 again.
10
11
T2_User_Guide_EN.indd 9
2/2/2012 7:19:42 PM
