IMATE SP3/SP3i
Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the
support section of the relevant site to check you have the latest version. You will need to
register your device to download updates.
For Imate go to www.clubimate.com
a.
ACTIVATING THE BLUETOOTH
You must activate the Bluetooth feature of your phone to establish a Bluetooth connection
between your Pocket PC device and other Bluetooth devices.
1. Select Start
. Select
Settings.
Select
Bluetooth.
Select
Bluetooth
2. Select
On
and tap
ok.
b.
PAIRING TO THE CELLULAR PHONE (not possible while charging)
1.
Bring your phone to within about 20 cm from the Supertooth.
2.
The Supertooth II is initially off. Turn it on by flipping up the
Swivel Arm
to
the 55º
position.
The
Bluetooth Indicator
will glow
(blue blink).
3. Simultaneously
press
the
Reject Button
and the
Pick-Up/Hang-Up Button
for about 10
seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change
from blinking blue to alternate blinking red and blue. SuperTooth II is now in
Handsfree
Pairing Mode.
4.
On your phone Select Start
. Select
Settings.
Select
Bluetooth.
Select
Bluetooth.
5. Select
Menu
…Select
Devices
… Select
Menu
…Select
New
.
Your phone now searches for Bluetooth devices and will display them in the list.
6.
Scroll to the name of the device,
Supertooth
, and then press
Select.
7.
Enter “0000” as the PassKey and then tap
Done.
8.
Enter a Display Name and Press
Done.
Note: In
Name
, you may or may not edit the
name of your bonded device).
9.
For the question,
“Would you like to designate Supertooth as a handsfree device?”,
Select
Yes
.
The Supertooth is paired with your SP3. An enabled Bluetooth icon will be seen on screen
indicating that the Supertooth is linked.
c.
ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and
then from the Supertooth.
1.
When answering is done on the Supertooth
(that is, pressing
Pick-Up/Hang-Up
once),
audio will be heard on it.
2.
When answering is done on the phone, ongoing call will be heard on the phone
(not on the Supertooth)
. But if you wish to hear and transfer the audio to the
Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth.
3.
To terminate the call, press down the Pick-Up/Hang-Up Button.
22
Содержание SuperTooth II
Страница 1: ......
Страница 73: ...www blueant com au PH 1300 669 049 AUS PH 0800 443 122 NZ 73 ...
