Blueant ENDURE, Руководство пользователя

Страница: 5 / 44

Pairing mode will time out after 2 minutes. To go back into pairing
mode, press and hold the Command button. To cancel pairing mode,
turn the Endure off and back on again.
Transfer Your Phonebook
Once the pairing is complete, your headset will attempt to transfer
your phonebook contacts so that it can announce the names of
incoming callers. Please accept any connection requests on your
phone from the Endure and wait for the transfer to fi nish.
Some phones do not support automatic phonebook transfers. If
the Endure announces that this is the case, you need to go to your
phone’s address book and send contacts via Bluetooth to the Endure.
See “Phonebook Troubleshooting” or
www.blueantwireless.com
for help.
Note: Whenever you add contacts to your phone in future you must
update your phonebook on the Endure: with the headset connected
to your phone but not on a call, hold down the Command button for 3
seconds to initiate a phonebook update.
Making Calls
Voice Dialing
To use this feature your phone must support voice dialing over
5
6