12
The car air purifier unit is controlled by pressing down the control knob to adjust the fan setting.
Functionality
1. General
Notes:
1. In order for the unit to clean the air optimally, please ensure that the car´s recirculation mode is
active and any window or sunroof is closed.
2. When the unit is powered off and then powered-up again, the fan speed is activated at the same
speed as the last used setting.
3. The cleaning time depends on the cabin volume of the cars in question.
2. The control knob - overview
The control knob is
mounted into the 12V
power supply port, e.g.
on the dashboard of the
car.
The other end of the
cable is inserted into
the power supply port
located on the main
unit.
A USB port on the
control knob enables
the driver or front seat
passenger to connect
and charge another
device (e.g.mobile
phone).
DC 12V
IN
1
Low fan speed
Medium fan speed
High fan speed
Clean Cycle mode
Back to low fan speed
etc.
Unit power on/idle
mode
Filter change alert
Fan speed setting
Notifications (see
section
“Notifications”)
Press the control knob
once and toggle
through the fan speeds
(see section
“Adjusting
fan speed”
). The control
knob display is only
illuminated when the
fan is active
The control knob can
also display:
2a. Navigation
2b. Information
