Installation
Installation
1. INDOOR USE ONLY
1) This unit is intended for indoor use only.
2. FOR LOCATION
1) Be sure that the location is strong enough to support the total weights of the unit and the
)
g
g
pp
g
content.
2) Keep the unit away from sunlight and other heat generating equipment.
3) The minimum clearance between the back of the unit and the wall should be 7 inches at least.
3. INSTALLING CASTORS
1) Be sure that castors with brake should be installed in front.
4 LEVELING
4. LEVELING
1) The unit should be leveled to provide adequate drainage.
5. ELECTRICAL CONNECTION
1) The unit should be plugged into a 115V/60Hz, grounded wall receptacle to
prevent electrical shock and fire hazards.
2) Do not plug other electrical units into same wall receptacle this unit is plugged into.
3) Do not use an extension cord.
Maintenance & Cleaning
3) Do not use an extension cord.
4) Compressor warranties are void if the compressor burns out due to low voltage.
Maintenance & Cleaning
1. To maintain proper refrigeration performance , the condenser fins should be
checked monthly and clean with a soft brush or vacuum cleaner as needed.
2. Wait at least 6mimutes after unplugging the unit before plugging in.
3 Th i t i
d
t i
f th
it
b
l
d
i
l
i
i
t
3. The interior and exterior of the unit can be cleaned using plugging in water.
1) Do not use an abrasive cleaners to avoid scratches on the surfaces.
4. The door-gasket should be cleaned to avoid maintain proper sealing.
4
Содержание BACB53
Страница 10: ...MEMO 10 ...