Blue-White FLEXFLO M3 Series, Руководство по эксплуатации, Страница: 42 / 60

®
FLEXFLO M3
Page 43 ®
FLEXFLO M3
12.0 Settings 12.0 Settings
Page 42
12.6 Pump Rotation Direction
This setting is used to change the rotational direction of pump. In most applications, the
tube will fail by developing a small leak in the outlet side (pressure side) of the tube
assembly. By reversing the roller rotation, the wear point in the tube is moved to the
opposite side to the pump tube assembly, increasing the life of the tube.
Important! Changing the rotational direction of the pump reverses the inlet & outlet
sides.
Disconnect power from the pump. Carefully purge any pressure in the discharge line of the pump. Disconnect the
suction end tubing/piping and the discharge end tubing/piping from the pump head tubing.
IMPORTANT! Swap sides of the suction (inlet) and discharge (outlet) tubing/piping. There is no need to remove
the pump head cover.
NOTE: The pump tube will form a natural U-shaped curve. Do not attempt to install the pump tube against the
natural U-shape direction as damage to the tube can result.
To Change The Direction Of The Pump Rotation
1
Open the App Drawer
2
Open Settings
3
Open System
4
Select Pump Direction
5
Select Desired Rotation
!
Clockwise
!
Counter Clockwise
6
Confirm by pressing OK
12.7 System Time
This setting is used to change the local time that is displayed.
To Input The System Time:
1
Select the Time in the upper
right hand corner
2
Select Desired Hour
3
Select Desired Minute
4
Select AM or PM
5
Confirm by pressing OK