Blue-White FLEXFLO A-100NE, Руководство по эксплуатации, Страница: 13 / 28

A-100NE
Page 13
+
Enter the programming mode. At the same
time, press the RUN/STANDBY button and
the MODE button. A blinking
ARROW will
point to the word PROGRAM indicating the
program mode has been activated. The total
time
TOT-T icon will blink. The currently
RUN
PROGRAM
STAND-BY
PRIME
MINIMUM
MAXIMUM
1
199.9
MODE
TOT-T SEC
RUN
PROGRAM
STAND-BY
PRIME
MINIMUM
MAXIMUM
1
42.5
MODE
ON-T SEC
selected time unit icon will be displayed. The current total time setting
will be displayed and the left most (selected) digit will blink. The decimal
is fixed and cannot be moved.
+
Pressing the DIGIT button will increase the selected digit.
+
Pressing the FIELD button will select a new the digit to the right or the
time unit.
+
Press the DIGIT button to increase the selected digit or time unit.
+
Press the MODE button to exit the total
time programming screen and enter the on
time programming screen. The
ON-T
icon
will blink. The currently selected time unit
icon will be displayed. The current on time
setting will be displayed and the left most
(selected) digit will blink.
+
Pressing the DIGIT button will increase the selected digit.
+
Pressing the FIELD button will select a new the digit to the right or the
time unit.
+
Press the DIGIT button to increase the selected digit or time unit.
+
At the same time, press the RUN/STANDBY button and the MODE
button. A blinking
ARROW
will point to the word
RUN
indicating the run
mode has been activated.
NOTE:
If while in the program mode no buttons are pressed within 60
seconds, the circuitry will automatically return to the run mode.