C-1700N
Page 2
TABLE OF CONTENTS
SECTION
HEADING
PAGE
1
Introduction
2
2
Specifications
2
3
C-1700N Features
3
4
How to install the C-1700N
3
4.1
Mounting location
3
4.2
Electrical connections
5
4.3
How to install the tubing and fittings
6
5
How to operate the C-1700N
8
5.1
Adjusting the Pump Output - Standard Models
8
5.2
Adjusting the Pump Output - Fixed cycle timer Models
9
5.2
Measuring the pump’s output - volumetric test
9
6
How to maintain the C-1700N
9
6.1
Routine inspection and cleaning
9
6.2
How to clean the C-1700N
9
1.0 Introduction
Thank you for purchasing the C-1700N positive displacement metering pump. The C-1700N is designed
to inject chemicals into piping systems. The pump has been tested by NSF International for use with 12
½% Sodium Hypochlorite. All models are equipped with two top mounted mechanical flow rate adjust-
ment knobs. Optional on/off cycling timers are available.
2.0
Specifications
Maximum Working Pressure
125 psig / 8.6 bar*
o o
Maximum Fluid Temperature
130 F / 54 C
o
Output Accuracy
+/- 10% of maximum (water @ 70 F, 0 psig, and 5’ suction lift)
o o
Ambient Temperature Range
14 to 110 F / -10 to 43 C
Enclosure
NEMA 3R (acceptable for outdoor use)
Duty Cycle
Continuous
Maximum Viscosity
1,000 Centipoise
Maximum Suction Lift
up to 10 ft. water
Power Requirements
115V60Hz 45 Watts
220V50Hz 45 Watts
230V60Hz 45 Watts
24V60Hz 45 Watts
Dimensions
9-1/16” high x 4-1/2” wide x 7-5/32” deep
Weight
7.5 lb.