NP5767
7
2) Adjust the outer cover and inflate the pool to 50% full, adjust the outer cover to make sure the holes on the cover match
the inflation ports, check the top of the pool to make sure the cover is roughly a concentric ring. Then inflate until full.
4. Connect the Pump to the SPA Pool
Remove the inflation hose and attach the connection hoses of pump to the pool according to the icons of filtering function,
heating function and bubbling function on the pool and the pump.
5. Install the Filter Cartridge
Make sure the filter cartridge is in the cover, then screw the filter cartridge onto the lower suction fitting.
3. Assemble SPA Pool
1) Connect the inflation hose to the adapter on the pump according to the icon . Press the bubble button to inflate the
pool according to the printed numbers 1,2,3. Do not hold the air drainage holes on the inflation hose when inflation.
(If there is an inflation lid included in the SPA pool, inflate each chamber of the cover)
CAUTION:
Do not over-inflate. Do not try to remove all of the wrinkles.
CAUTION:
Do not cover the air drainage holes on pump hose adapter.
2. GFCI Test
WARNING: RISK OF ELECTRIC SHOCK.
The GFCI plug must be tested before each use.
DO NOT use if GFCI test fails.
Insert the plug into the power outlet.
Press the “RESET“ button, the indicator light turns red.
Press the “TEST” button, the indicator light turns off.
Press the “RESET” button, the indicator light turns red and the pump is ready to use.
1
2
3
spa is plugged in, or spa will NOT start.
