5
OPERATION INSTRUCTIONS
6
. Turn on the water supply. This will cause a
venturi
suction
at the vacuum head
.
D
ebris
is collected
in the vacuum bag.
8.
When done or when the bag is full:
a)
Slowly move the vacuum head to the side
wall of the pool, turn the vacuum head
up-
side-down, shut off the water, and
remove
the vacuum head from the pool.
b)
Remove the vacuum bag and discard all of
the debris, flip the bag inside-out, and
rinse with running water.
7
.
Carefully, and s
lowly push the
V
acuum
H
ead
across the pool
floor to remove debris. Do not
press hard on the liner as this may cause damage.
9
. Repeat the above steps until the pool has been
cleaned thoroughly.
Vacuum
ing
with
Base Vacuum Head
1. Start with the Base Vacuum Head
and
attach
it
to the
telescopic
pole as shown
below
.
2. Attach a 1.25" Vacuum Hose (Not Included)
to the
B
ase Vacuum Head.
3. Attach the Vac
uum
Hose Adapter
(pictured below)
to the
open
end of the
1.25"
Vac
uum
Hose.
NOTE:
The Vacuum
Hose Adaptor is Not Included
in this Kit
)
