10
8. Do not plug in the filter pump at this point. Begin to fill water until
the water level reaches the fill line.
6. Connect the Hose
r
from the Suction Fitting to the Pump Inlet.
5. Connect the Hose
r
from the Return Fitting to the Filter Pump
Outlet.
7. Tighten all Hose Clamps
t
to prevent water leakage.
POOL
RETURN
FITTING
POOL
SUCTION
FITTING
13
14
13
14
Filter Pump Inlet
Filter Pump Outlet
18
16
360°
7
8
10. Hand loosen the RF Locking Ring
8
. Adjust the Return Fitting
Diverter
7
to maximize the circulation of the pool water. Hand
tighten the RF Locking Ring
8
.
NOTE:
It is recommended to point the
diverter down and away from the suction or
water intake for optimum pool circulation.
9.
Vent the Pump:
to release the air trapped inside and make sure a smooth
water flow, it’s important to vent or depressurize the Pump before each use.
Simply twist counterclockwise to loosen the Vent Screw
u
, and the water
pressure will force all the trapped air out. Retighten the Screw when water
starts flowing out from the Seal Top
o
.
14
