SkyLink User Guide v2.4
Page
35
of
50
© 2022 Blue Sky Network, All Rights Reserved
OPTIMIZING SIP PHONE APPS
Below are a few setup pointers for SIP phone apps (e.g., GS Wave, Linphone).
iPhone/Android settings:
o
Airplane mode
o
Smartphone Settin
gs > Wave Lite App > Enable ‘Local Network’ access
o
Smartphone Settings > Wave Lite App > Disable ‘Cellular Data’
GS Wave settings:
o
‘WiFi only’ mode enabled
o
Account Name: 510 (510-516 available default)
o
SIP Server: 192.168.111.1 (unless SkyLink Device Interface IP has been changed)
o
SIP User ID: 510
o
Authentication ID: 510
o
Password: 510
Additional settings for other SIP phone apps (Linphone, etc.):
o
Codecs (if setting is available): Enable
–
A-LAW, 722. Disable
–
U-LAW
NOTE
: If using a physical SIP phone (not a SIP phone app), please see your SIP phone manufacturer
’s
documentation for information on configuring the phone with your SkyLink device.
If you are not receiving incoming call notifications on SIP
extensions, it may be that the SIP extension you are using is
not configured to receive incoming calls from the Iridium
line you are calling.
To configure both lines:
1)
2)
Click the icon next to the SIP or POTS extension
that you would like to edit.
3)
Ensure that both boxes in the Inbound Line(s) field
are ticked, then click ‘Save.’
