HawkEye (PT) Plus User Guide
Settings Menu
Blue Sky Network
Page 27 of 34
To pair your Bluetooth device with the HEPT Plus:
1.
On the HEPT Plus - Turn on Bluetooth.
2.
On the HEPT Plus - Enable the Connectable setting.
3.
On the HEPT Plus - Enable the Visible setting.
4.
On the HEPT Plus - Set the Bluetooth name.
5.
On the HEPT Plus - Set the Bluetooth PIN.
6.
On the HEPT Plus - Enable Bluetooth Authentication.
7.
On the device you wish to connect from (laptop/desktop computer) – Start the Bluetooth pairing
process:
a.
In the list of discovered devices select the Device Name of the HEPT Plus.
b.
Enter the PIN you defined on the HEPT Plus.
c.
The devices are paired.
CALIBRATE
The HawkEye (PT) Plus has a resistive touchscreen which must be calibrated from time to time to ensure accurate
operation of the touchscreen. From the calibrate option it is possible to reset calibration back to factory settings
or alternatively manually calibrate. If the HEPT Plus is accidently recalibrated with bad settings and the
touchscreen is unresponsive, hold the power button for 8 seconds until a reset calibration message appears on the
screen.
CONTRAST
The Contrast option is used to change the HawkEye (PT) Plus LCD brightness. Move the contrast slider-bar to the
desired level and press back to apply.
FAVORITES
The Favorites option allows users to customize shortcuts to menu options which will appear at the bottom of the
home screen. Adding shortcuts to the home screen allows quick and easy access to your most frequently used
options. Up to four customizable favorite icons may be utilized at one time.
LANGUAGE
The only language available at this time is English.
LED
The HawkEye (PT) Plus status LED alerts users when the device is in emergency mode, tracking mode, GeoFence
tracking, mailbox check or call out. When QPOS/911 Emergency Mode is enabled the LED is lit solid green, at all
other times (including during sleep mode) the LED flashes once every 5 seconds. LED features The LED can be
turned off for either of these two cases to save battery power using the LED option.
