HawkEye (PT) Plus User Guide
Tracking Menu
Blue Sky Network
Page 21 of 34
MANDOW N
The HawkEye (PT) Plus has a built-in Motion sensor which is used for the Mandown feature.
Mandown is a Motion feature that detects if the user has stopped moving and responds to SkyRouter
when movement has not occurred for a configured amount of time.
NOTE: Motion events must be enabled for the active tr
acking Profile (see “Profiles” section) in order to
utilize Motion features.
The Mandown icon is not visible on the HawkEye (PT) Plus by default, the Mandown icon must be
enabled using the HawkEye (PT) Plus Manager Application.
HOW IT W ORKS: MANDOW N
Once Mandown is enabled the Mandown “Time Down Duration” starts to count down.
o
If movement occurs before the “Time Down Duration” expires; the “Time Down Duration”
is reset.
o
If movement does not occur before the “Time Down Duration” expires; the device will
enter the “Count Down Duration” state.
Once the
device enters the “Count Down Duration” state the device will show a prompt on the
screen asking “Are You OK?” and an audible beep is heard.
o
If the user responds indicating that they are OK the
“Time Down Duration” is reset.
o
If the user does not respond the device will enter the Mandown state.
Once the Mandown state is reached the device will emit a siren noise continuously, the device
will also enter Quick Position Mode.
o
Mandown state must be manually cancelled.
ENABLE/DISABLE MANDOW N FEATURE
The default configuration for Man Down is disabled; enable Mandown from the Mandown menu by
selecting the “On” radio button under “On/Off State”.
When Mandown is enabled the Mandown icon will appear in the top right portion of the screen. Additional
options for the Mandown feature can be configured using the Manager application.
TIME DOW N DURATION
The length of time which motion does not occur; the device will enter Count Down state if the device does
not move for this amount of time. The Time Down Duration can be set at any time, even if the Man Down
feature is disabled, tap in the “Time Down Duration” field and use the numeric keypad to enter the
duration value, acceptable values are between 1-65535 seconds. Press the back button at any time to
cancel.
COUNT DOW N DURATION
Once the
“Time Down Duration” has been satisfied (without any movement); the device will display a
prompt on the screen “Are You OK?” and an audible beep is heard, if the user selects “Yes” the Mandown
“trigger timer” is reset; if the user does not select “Yes” or selects “No” the Mandown state is triggered.
