Blue Seal IN512, Инструкция по установке и эксплуатации, Страница: 12 / 21

Operation
10
Operation Guide
1.
Blue Seal appliances have been designed to provide simplicity of operation.
2. Improper operation is therefore almost impossible, however bad operational practices can reduce the
life of the appliance and produce a poor quality product. To use this appliance correctly please read
the following sections carefully.
Description of Controls
(Model IN512 Shown)
HI / LO Temperature Control Knob
Used to select the hob required and to adjust the temperature setting for individual hobs.
Pan Detection / Power ‘On’ Lamp (Green)
Illuminates and remains ‘On’ when a selected hob is turned ‘On’ and has a pan on the hob.
If the hob is turned ‘On’ without a pan on the hob, the lamp will commence flashing until a pan is placed on
the selected hob.
Also used with the ‘Fault Lamp’ to display Generator Faults, refer to ‘Error Code Pattern’ in the ‘Fault
Finding’ section.
Fault Lamp (Red)
Illuminates and remains ‘On’ when a fault is detected. The red fault lamp will remain ‘On’ until the fault is
rectified. Refer to ‘Error Code Pattern’ in the ‘Fault Finding’ section.
C
AUTION
:

This appliance is for professional use and is only to be used by qualified
persons.

Only qualified service persons are to carry out installation and servicing
operations.

Components having adjustments protected (e.g. paint sealed) by the
manufacturer should not be adjusted by the user / operator.
Pan Detection / Power ‘On’ Lamp (Green)
HI-LO Temperature
Control Knob
(Rear Hob)
Fault Lamp (Red)